Contact

Products

Iron removal / manganese removal filtration unit

Features

Top manufacturer of iron and manganese filter media!
Ancillary facilities are also substantial!
Leave maintenance and construction to us!
Equipment design and filter media deterioration degree analysis!

● A full range of incidental facilities!

In iron removal and manganese removal treatment, it is necessary to control pH and residual chlorine. We can proportionally control the injection amount of chemicals such as sodium hypochlorite using a water quality sensor and diaphragm type metering pump manufactured by the German manufacturer Prominent. By controlling the injection amount of chemicals, stable iron removal and manganese removal treatment becomes possible.

We can also manufacture and arrange all ancillary equipment such as pumps required for treating groundwater and surface water, raw water tanks and water tanks for storing chemicals.

● Leave maintenance and construction to us!
We have many achievements in maintenance and construction of iron removal and manganese removal treatment equipment.
We will not only propose and manufacture the equipment, but also install the equipment, test run, and maintain the equipment.

● From the software / hardware design of the equipment to the analysis of filter media deterioration!
We design soft and hard equipment for iron removal and manganese removal.
We propose a treatment flow from the raw water quality analysis table, but for raw water that is difficult to judge from the water quality analysis table, we conduct water tests and field tests on the actual raw water to remove iron and manganese that match the raw water. We can propose equipment.
For equipment that has been used for many years, we not only perform maintenance, but also diagnose the deterioration of the filter media and propose the time to replace the filter media.
Please contact us by all means.

specification

Iron removal only Manganese
removal only
Iron removal /
manganese removal
(Low concentration)
Iron removal /
manganese removal
(High concentration)
Anthracite
Filtered sand
Toyorex F
Acty
Fiber
SMF membrane
Manganese sand
Ferrolite
MC・GC
Activated carbon
(Residual chlorine /
Saturation removal)

(Residual chlorine /
Saturation removal)

(Residual chlorine /
Saturation removal)

(Residual chlorine /
Saturation removal)

◎: Optimal, □: Used for multi-layer filtration, ■: Used for pretreatment, ♢: Used for post-treatment

Design proposal

1. Device design proposal (water test)

We ask our customers to send us the raw water quality table and the actual raw water, perform water tests, etc., and propose a software design for iron removal and manganese removal filtration equipment that suits the site.
It is also possible to conduct a long-term water flow experiment on site and ask the customer to confirm the actual processing capacity.

② Device design

Based on the water quality table of raw water _and the results of water tests, we will design the hardware of the equipment for manufacturing iron removal _and manganese removal treatment equipment, _and create flow charts _and manufacturing drawings.
We also calculate the strength of filtration towers _and water tanks, _and select equipment such as pumps that are suitablefor water quality and flow rate.

Head Office

1-12-11 Tagawakita, Yodogawa-ku,Osaka
532-0021

Overseas Business Department

TEL +81-6-6301-6460
FAX +81-6-6308-3022